4 Warning Signs Of A Dangerous Boiler

Thinking that your boiler is dangerous is not a good feeling. Most of us know the harm that carbon monoxide can cause, and since it is a colourless and odourless gas it’s a worry that it could strike without us knowing. Ensuring regular checks with boilerreplacement.net is important for the health of you and your family.

The truth is, just because your boiler is faulty it doesn’t mean it will be dangerous. But there is certainly a higher chance that it could be emitting the deadly gas if it is faulty and any company like boilerreplacement.net will tell you that.

So what are the signs that your boiler is dangerous? We’ve compiled the top 4 warning signs.

  1. THE SMELL OF SPENT GAS OR FUMES

Carbon monoxide gas has an odour added to it so we can smell it. So if you can smell it coming from your boiler or from anywhere else in your house, you should switch your boiler off straight away. If there is a gas leak, you might not always smell the gas, so there are other warning signs to look out for too.

  1. YOUR BOILER’S PILOT LIGHT GOING OUT CONSTANTLY OR A YELLOW FLAME

Your boiler is dangerous if the pilot light is yellow. It should be a strong blue flame. If the light keeps going out, don’t just reset it – get a Gas Safe engineer in to have a look at your boiler.

  1. BLACK MARKS OR SOOT AROUND THE BOILER

If you can see black marks on the boiler or in the area where it is kept, that’s a reason to switch it off. Get an engineer round to check it over, as there could be a carbon monoxide leak.

  1. YOU’RE NOTICING YOU’RE GETTING LOTS OF HEADACHES OR FEELING SICK

Carbon monoxide poisoning can cause headaches and nausea in victims before it gets more serious. If you notice that these feelings increase when your boiler is running, it’s very likely that your symptoms are caused by the boiler.

If you’re worried that your boiler is dangerous, always get a Gas Safe engineer out to come and inspect it. There is no point worrying about it when you could be reassured by a professional coming in to check everything is OK.

Individuals opt to replace their boiler with boilerreplacement.net for a range of factors. It may be that their existing one is malfunctioning, old or inefficient. When you’re picking a brand-new boiler, you have various options to choose from. These include combi boilers, conventional boilers and system boilers. Each of these boilers run in numerous ways and are matched to different home sizes.System boilers are otherwise known as sealed system boilers. Like standard boilers, they have hot water cylinders, but they do not have cold water tanks. System boilers are usually established in larger domestic homes or business premises.

Warning Signs Your Roof Is Dying

Sometimes a roof can naturally reach the end of its useful life without experiencing a roof failure. It just looks old and worn, and you are doing preventive maintenance on your home. If replacing an old roof is delayed, however, it could result in bigger problems down the road. So watch for the warning signs to be sure to give yourself plenty of time to add the project to your TO DO list. For help with your reroof project, have a look at assuredproroofing.co.uk today.

  • Potential signs that your roof may need to be replaced:
  • Shingle edges are curled or shingle tabs are cupped
  • Bald spots where granules are missing
  • Cracked shingles
  • Your roof is at least 20 years old; while many shingles today are produced for durability, many factors can accelerate the aging of shingles. For example, if your roof is not properly ventilated, it can negatively impact your shingles
  • Neighbors are getting new roofs. Homes built around the same time period can experiencing the same types of weather conditions can mean that your roof is nearing its useful life
  • The roof just looks old and worn
  • Dark streaks. Airborne algae cause dark streaks on roof decks. While this may not necessarily harm the roof shingles, it may not look good. Algae streaks can be removed using a 50:50 blend of water and bleach sprayed on your roof. It is important to use a low volume garden hose so you do not knock the protective granules off your shingles. It is also important that you protect your landscaping from the bleach run-off.
  • Moss can grow on roof surfaces that don’t get much sunlight especially in cool, moist climates. Moss growth can be more than a cosmetic issue. Moss holds moisture against the roof surface and overtime in freezing climates can cause damage to the granules on the top of the shingles. Moss can be brushed off but it won’t prevent it from growing again; take care not to damage the shingle surface. You may need to contact a professional roofing contractor.

Blasting Differences!

Media blasting is how we clean up steel after fabrication. When we go to blast steel components there are a lot of options and they all have something different to offer. Grit blasting with ftguk.co.uk is a blanket term for using an abrasive that is shot at high velocity, which will clean or alter the metal’s surface. Media blasting can be used to varying effects, and it is important to know what you are doing before you select a given media for the job.

In recent years a new technology has come along in the world of media blasting. Soda blasting offers some very unique abilities and is far better for the environment. Soda blasting uses sodium bicarbonate (baking soda) to remove contamination from a metal’s surface. It also coats the metal with a layer of sodium bicarbonate, which is easy to remove.

Grit Blasting

The terms “grit blasting”, “media blasting” and “sand blasting” can be used interchangeably in most cases. In any event, grit blasting refers to the use of a pressure driven media on an object. There are many different substances that we use in media blasting, and they all have different effects.

As you can see from the list above, the choices that we have when it comes to media selection for grit blasting with ftguk.co.uk are ample. Every media will have a different effect, and in some cases experimentation is necessary for us to find the best combination for your needs.

Over the last few years environmentally friendly media options have become available, and things like walnut shell and corn cob offer a green alternative for many jobs. An in-depth discussion of all these media choices could easily fill a book. Keep in mind that many of these options have a range of sizes available, so you can fine tune not only the media, but the grain size as well.

While all these blasting mediums are worthwhile, we are going to talk about two of them specifically in greater detail. These two media offer some very useful qualities, and you should be especially aware of what they can do for you.

Shot Blasting

Shot blasting uses a stream of steel shot directed at an object to clean or treat metal. There are two types of shot blasting; wheel blasting and air blasting. There isn’t a huge difference to the customer between the two types, and we can help you decide which process is going to be the best for your project.

In addition to cleaning metal parts, shot blasting will “peen” the metal. This is a process by which the material is made to spread plastically and create compressive stress, thus protecting it from certain kinds of fractures.

Other kinds of media blasting can be used for peening, however shot blasting is extremely common for this task. Because steel shot is used, there is little if any mess to clean from the blasted object, and the impact strength of the shot is much higher than other forms of media. This also leads to higher media recovery rates, and a lower cost outlay for the shot.

Soda Blasting

Using specially prepared sodium bicarbonate offers you a lot of interesting capabilities and is by far the easiest form of media blasting to clean up. Because blasting soda is water soluble, cleaning it from small parts or public areas is very easy. In some cases you can just wait for the next rain, and let Mother Nature do the job.

When it comes to custom fabricated parts, a quick soda blast will deposit a layer of sodium bicarbonate on the raw steel and prevent rust from forming for as long as it is present. The down side to soda blasting is its softness, so for deburring and de-slagging it really isn’t right.

Soda blasting is also the greenest form of media blasting, and won’t pollute the environment in any meaningful way. It is perfect for removing oils and other contaminants, and can then be removed with water. Because soda reclamation is difficult under most circumstances, the media costs are a bit higher. On the flip side, soda blasting cuts your clean-up costs down to almost nothing. It is a great blasting method and is growing in popularity all the time.

A Handy Guide to Children & Carpet Care

Our carbon footprint is so important these days, and this trend toward safe chemicals that do not harm the environment is great for families that include small children. Many safe regular cleaning products are being sold at supermarkets and used by professional carpet cleaners. Chemicals that were eco-friendly used to be hard to come by and now they’re far more readily available. Being able to buy environmentally friendly cleaning products means that you can now get top quality safe chemicals that will be good to both the earth and to your children, at a fraction of the cost of years gone by. You can fight dust mites and other allergens without draining your bank account every time you need to clean the house and companies such as connoisseur-carpet-care.co.uk are full of knowledge about which products are the best to use. Everyone knows that having children around can make housework difficult, especially if those children are under 5 or at the crawling baby stage. When you perform your regular cleaning routine in your home, you may be leaving behind all sorts of dust mites and other allergens that can have a negative effect on your children’s health, especially crawling babies.

Having children that crawl tends to go hand in hand with them putting their hands or toys in their mouths. You’ve got to use safe chemicals to deep clean your carpets and you will be increasing the cleanliness of your home while protecting the health of your little ones. There are many companies who clean carpets with safe chemicals. So many carpet cleaning chemicals get the job done right but they are not all child friendly and that can be a problem with little ones in the home. Generally children have sensitive body systems and are more vulnerable to harmful chemicals in their environments than are their parents.

Children are brand new and not used to the poisons in the air in the same way grown-ups are as they’re still relatively new with vulnerable immune systems. While deep cleaning is really important in order to keep your home free of the dust mites that can stir up allergies in your kids, it is important that you only use safe chemicals. Make an effort to only use products that will not cause harmful effects, even when used frequently. When you are hiring a carpet cleaning company, make sure that you discuss all of the products being used during the cleaning process. You need to know the names of the chemicals that you use so you can make sure there are no allergens in the bottles that your children wouldn’t breathe in. You’ve got to make sure that the chemicals used are correct.

Make sure you don’t stay quiet; ask any and all questions that pop into your head during the cleaning process and make sure children are not in the room while you clean.

A Handy Guide to Children & Carpet Care

Our carbon footprint is so important these days, and this trend toward safe chemicals that do not harm the environment is great for families that include small children. Many safe regular cleaning products are being sold at supermarkets and used by professional carpet cleaners. Chemicals that were eco-friendly used to be hard to come by and now they’re far more readily available. Being able to buy environmentally friendly cleaning products means that you can now get top quality safe chemicals that will be good to both the earth and to your children, at a fraction of the cost of years gone by. You can fight dust mites and other allergens without draining your bank account every time you need to clean the house and companies such as connoisseur-carpet-care.co.uk are full of knowledge about which products are the best to use. Everyone knows that having children around can make housework difficult, especially if those children are under 5 or at the crawling baby stage. When you perform your regular cleaning routine in your home, you may be leaving behind all sorts of dust mites and other allergens that can have a negative effect on your children’s health, especially crawling babies.

Having children that crawl tends to go hand in hand with them putting their hands or toys in their mouths. You’ve got to use safe chemicals to deep clean your carpets and you will be increasing the cleanliness of your home while protecting the health of your little ones. There are many companies who clean carpets with safe chemicals. So many carpet cleaning chemicals get the job done right but they are not all child friendly and that can be a problem with little ones in the home. Generally children have sensitive body systems and are more vulnerable to harmful chemicals in their environments than are their parents.

Children are brand new and not used to the poisons in the air in the same way grown-ups are as they’re still relatively new with vulnerable immune systems. While deep cleaning is really important in order to keep your home free of the dust mites that can stir up allergies in your kids, it is important that you only use safe chemicals. Make an effort to only use products that will not cause harmful effects, even when used frequently. When you are hiring a carpet cleaning company, make sure that you discuss all of the products being used during the cleaning process. You need to know the names of the chemicals that you use so you can make sure there are no allergens in the bottles that your children wouldn’t breathe in. You’ve got to make sure that the chemicals used are correct.

Make sure you don’t stay quiet; ask any and all questions that pop into your head during the cleaning process and make sure children are not in the room while you clean.

Five Ways to Upgrade Your Home

Whether you are planning to release some money out of your home for upgrades or unlocking some of your property wealth to enjoy a cash boost, it makes sense to keep your house in the best condition you can. Regularly renovating and upgrading the home and garden can make such a difference to the value of the home and it’s a good way to invest some of your hard earned money. The higher the value of the home the greater the equity will be available to you and there are some very good ways of adding value to the property.

  • Adding a bedroom. When you carry out either a loft conversion or build a bedroom over the garage, adding a bedroom can really create value to the home. Investing in a company like co.uk means you can ensure your windows of the new bedrooms are done professionally as well as the doors you install.
  • Build an extension. If you’re in a bungalow adding a whole floor to your home can really add some value. Obviously you have to have the right planning permission but this can be the most expensive way of adding value to your home. If it’s done well and in keeping with the rest of the property the return on your investments can be well worth it in the end.
  • Upgrading the kitchen. Usually the kitchen is the hub of the home and as it’s where you do most of your entertaining keeping it updated is important. You can get the windows and doors done through co.uk or a similar company and that way you can add a decent percentage to the value of your home.
  • Upgrading the bathroom. Another way of adding value to your house is by bringing an outdated bathroom to life. A new suite, flooring and tiling will transform the room and adds a good bit of money to your home. You can even add in an ensuite to your bedroom and this will drastically change the value of the home as a lot of families – especially new parents – appreciate what a second bathroom can add to the house.
  • Companies such as jpglass.co.uk can install conservatories to the home to be enjoyed by everyone whatever the weather. If it’s under a certain size you won’t even need planning permission and even a small conservatory can add value.

You can have a chat with your mortgage provider as well as someone independent to come out and value your property for you and they should be able to tell you whether the changes you have made have been worth it for the house. Your home can be the most important asset you own and especially when you get to retirement. Your home could be the future inheritance for your children and adding value to it now will mean something amazing for your family in the future.

Cruise VS Holiday Resort

If you’ve been abroad on a fabulous holiday abroad at a great resort or on a cruise sailing across the Mediterranean, you’ll know the absolute joy and peace time away can bring. Choosing a holiday however, can actually be stressful! Booking a holiday is now something of a difficulty given the sheer choice available now so we’ve divided it down between the two most popular holiday choices, a cruise or a holiday resort.

Holiday resorts have a distinct advantage in that they give you the choice from self-catering to all-inclusive and everything is in one place. If you’re looking to stay in one place and explore one region then a holiday resort holiday can be easier. Travelling with small children is also a consideration as after a flight the last thing most want to do is then travel even further than their destination. Are you interested in a geographic range of choices? Then a cruise is likely the best option for you as it’s practically a floating holiday resort given the sheer size of the ship and what it has to offer. Travelling across different areas of the world full board and with many activities on board you get to have your entire holiday and everything you could want right at your fingertips.

The sheer design of holiday resorts today mean that hotels and apartments are far more attractive than they used to be. Being able to have the choice of a suite versus a room on a resort can mean the difference as to whether you have a balcony or not with your room. While wrought iron railings along balconies are a feature in old hotels and country manors, most holiday resorts have upgraded themselves to glass balconies and balustrades. Unparalleled when it comes to style and chicness, glass balconies offer an uninterrupted view. Companies like capitalinteriors.co.uk offer anti-scratch glass or decorative glass designs and planners who use these on hotel or cruise ship balconies can quite clearly see the market that they are designing for.

When sailing on a cruise ships, the outdoor cabins and suites generally have balconies with sheer glass to allow for an excellent view and is strong enough to resist impact and stresses and is highly aesthetic. A lot of older hotels and resorts are complimented by the standard wrought iron railing balconies but people tend to prefer the cleaner, more modern look of glass and the structural glass offers a frameless look.

When choosing a holiday, people are attracted by the ‘packaging’ in the same way Marks and Spencer package differently to other supermarkets to be more aesthetically pleasing. Most holiday makers are looking for hotels or cruise ships that look attractive. No one wants to pay for a holiday with no decent windows or painted bright pink with purple spots. Companies online supply toughened glass and this is used and designed on things like frameless balconies to withstand the weather and the play of toddlers.

Reasons For Conveyancing Delays

When buying a home, there are a million and one variables that could cause the process to pause, even abroad, and you could find yourself in a lengthier process than you ever imagined. Consulting with kobaltlaw.co.uk can help. However, there are a few pitfalls that you could easily avoid in order to speed up the process.

Thankfully we’ve compiled a few of the most common causes for delays in the conveyancing process so that you can keep moving forward.

Delays in the Conveyancing Process

These delays are rarely to do with the actual conveyancer or estate agent and are typically caused by problems further down the property chain. There are however a few things you can do to ensure minimal impact should the situation occur.

1.       Instruct your solicitor as soon as your house if placed on the market or an offer is made

The moment you put a property on the market, or somebody places an offer on yours, you should inform your estate agent who your property solicitor is so they can be contacted. In this respect, it’s important to hire a conveyancing firm as early as possible during the process as this will ensure delays are avoided.

2.       Obtain a management pack

This applies mostly to leasehold properties as the solicitor will also have to have a copy of the ‘memorandum and articles of association’ in order to understand the accounts of the management company over the past three years.

If you are looking to purchase a leasehold property, then informing your solicitor immediately will allow them to obtain the necessary documents from the outset.

3.       Check the planning permission

Conveyancers are obligated to ensure that all planning permissions and building regulations are obtained when acting on behalf of a lender. In saying this, when there are no lenders involved in the transaction there is still a duty to ensure that any changes made to a property prior to the sale have been carried out correctly and have adhered to the relevant regulations. Make sure to get this checked early on in order to avoid and repercussions further down the line.

4.       Sign or return any required legal documents on time

A normal aspect of purchasing or selling a property is legal documentation and ensuring that all paperwork is signed and delivered on time is key to problem free processing.

5.       Be aware of longer mortgage affordability interviews

As of April 2014, new regulations were enforced in order to avoid lenders providing loans to those who are unable to afford repayments. It’s due to these changes that longer and tougher mortgage affordability tests have been implemented by lenders. When applying for your mortgage, be sure to allow plenty of time for both the interview itself and the final decision as a ‘yes’ is no longer guaranteed.

6.       Allow time for local authority searches

The local authority must run searches on the property and its land in order to determine a number of factors, such as who owns or is responsible for the road or sewers in the surrounding area, and whether there are any road-widening proposals in place. If you are buying abroad, kobaltlaw.co.uk can advise here.

While your solicitor will take care of this, it’s important to remember that local authorities often have to handle a high rate of requests and while many will return the searches within a few days, others may take up to eight weeks.

While the housing market can be a difficult place, we hope that these tips for avoiding any unnecessary delays will assist you in a smooth and problem free buying or selling process.

Buying Abroad

Whether you’re thinking of making a big move or simply shopping for a vacation home, owning a property in another country sounds delightfully adventurous and promising. However, the road to getting there can be full of confusion and legal and financial setbacks. To make sure that your buying experience is as stress-free as possible, here are some tips on purchasing property internationally.

Hire a lawyer.

The best way to get started on your search for a home abroad is to hire independent legal counsel with kobaltlaw.co.uk in your destination country. This should be a lawyer or a legal firm that specialises in real estate law whom you have chosen independently (that is, without any association to whomever may be your real estate agent overseas). The importance of hiring someone who has explicit knowledge and experience with property law in his or her own country cannot be overstated, as these laws can differ greatly from the ones you may be familiar with in your own country. And though bilingual lawyers usually cost more, you will greatly benefit from receiving legal advice from someone who has the ability to translate to English.

Take time to research.

Buying property with kobaltlaw.co.uk in your home country would take a lengthy research process — you’d have to work with your bank to sort out how much property you can afford, scour the listings to see which areas offered the best value, and then contact a mortgage company to create a plan for financing the property. Buying internationally only adds more steps to this process, so it is important to begin with a clear idea of how much time it will take to find a property abroad and to go through all the paperwork — and stick to that timeline.

Be prepared to create a will

— in English, and in the language of your future destination. One of the major costs associated with owning property in many countries is the inheritance tax that you will be required to pay on that property. Sometimes, you can restrict the amount of tax that you will have to pay on that property by writing a will, but it must be in the dominant language of the country that you’ll purchase your property in — another good reason to have a bilingual property lawyer.

Be generous when creating your budget.

Even if you get a good price for your property abroad, you should still be prepared to pay more than an additional 10 percent of that cost in legal fees. You’ll also need to make sure that you have purchased an appropriate amount of insurance for your property. Even still, you’ll need to sort out whether it is financially more expedient for you to finance your property in the UK or abroad. And finally, watch out for potential pitfalls when it comes to currency exchange rates.

Repairing A Damaged Roof

The source of most roof leaks is hard to find because it originates away from where the leak shows up. In order to find the source of a leak, follow a roofer’s advice and “think like water.”
Water typically comes in through worn, broken, or missing shingles; where nails have worked loose; or through corroded or poorly sealed roof flashing around vents, skylights, or chimneys or along the intersections of roof planes. Once water passes the roofing, it flows along the sheathing, roof rafters, or topside of ceilings until it finds a place to drip down—inevitably onto your favorite piece of furniture. Look for a roof leak during the day. Go into the attic with a bright flashlight; step only on secure framing members and never on the insulation or topside of the ceiling below—neither of these will support you! Start above the place where the drip has occurred and work your way uproof, looking for wetness along the framing members.

If the weather has been dry for a while, look for water marks, stains, or discolorations on the wood made by moisture. Then switch off the light and try to find a hole where daylight shows through the roof. (With a wood-shingle roof, you’ll see many such places, but while the overlapped shingles let light show through they shed water.) If it’s still raining, put a bucket under the leak in an area with proper support. Let the bucket collect the drips and fix the leak when the weather clears. You can also use a company like roofbuildhomeimprovements.co.uk to sort the leak for you, if you don’t have the tools

When installing shingles, make sure the nails are embedded securely into the felt and sheathing. Over time, the sun’s heat will cause the roof and shingles to expand, making the nails pop out of place and thus increasing the risk of a leak. Because the roof is sloped, make sure you layer the shingles from bottom to top, overlapping the top set with the bottom. This will ensure your roof is protected from all the weather elements.

Rent a nail gun. Most can be rented for about $20 a day. The gun usually comes with a measurement guide that can save a lot of time. The standard width between each row of shingles is 5 inches.

After cleaning the debris and reframing the roof, lay down a base (sheathing). Eight-foot, 1/2-inch-thick plywood is standard sheathing material. Measure the opening of the section of roof to be shingled, cut the plywood to size and nail to roof rafters. Stagger the sheathing in a brick pattern for extra strength. Do not place an entire 8-foot section of plywood onto roof. Such a long piece is structurally unstable in the middle. Continue to install in brick pattern, staggering the plywood seams until the open area is covered. Start by stapling the 6-inch starter strip at the bottom section of roof leaving a 1-inch overhang on the eave to ensure drainage into the gutters. Going from bottom up, lay and nail the remaining felt layers with a 2-inch overlap. Be sure to nail the tar strip on each felt layer to ensure maximum hold. Companies like roofbuildhomeimprovements.co.uk will always be on hand for good advice when repairing a roof.

Lay the first row of shingles starting at a bottom corner of the roof. Place a base row of shingles following the chalk lines on the felt and move upward in a pyramid shape. Use six nails per shingle to ensure maximum hold, and be sure to always nail on the tar strip. Continue working your way across and up the roof, following your initial pyramid base. If repairing a section of damaged roof, be sure you layer the existing shingles on top of the new. This will ensure a uniform and seamless look.